Stainless Steel, Direct Lift to 5000 psig (345 bar) Medium Pressure Valve Configurable for Variety of Fluid Applications
Features
Features
- Direct acting valve
- Pressure to 5000 psig (345 bar) depending on fluid and orifice size
- Barstock body construction
- Compact size
- Stainless steel construction on all wetted parts: 316 for pressure containing parts and plunger material is 416 stainless that is treated for increased corrosion resistance
- Will handle fluids with viscosity up to 200 SUS
- Fluid temperatures from -423°F to +500°F (-253°C to +260°C)
- Suitable for use with wide variety of fluid including: air, gasses, liquids, hydraulic fluids, steam, cryogenic fluids, and corrosive fluids
- Optional seat materials of Teflon®, PCTFE, Buna N, Viton®, EPR, or 316 stainless steel depending on fluid type and pressure
- Body seal materials of Teflon®, Viton®, Buna N, or EPR.
- Flow orifice sizes of 1/16", 3/32", 1/8" and 3/16"
- Pipe sizes of 1/8" and 1/4" NPT
- British BSPT ports available
- Cv from 0.093 to 0.72
- Class H coil is standard
- Can use a class H double wound coil (requires use with a relay to drop put primary coil winding after valve actuation) depending on pressure
- Coil housing is NEMA 1
Unit of Measure
Specifications
Series |
N/A 1100 |
Fluid Media Type |
N/A Gas |
Body Material |
N/A Stainless Steel |
Seat & Seal Material |
N/A
Viton® |
Position of Valve (DE-Energized) |
N/A Normally Closed |
Connection Size |
N/A 1/4 in |
Connection Type |
N/A Female NPT |
Orifice Size |
N/A 3/32 in |
Operating Pressure |
N/A 500 psig |
Temperature Range |
N/A -15 to 400 ºF-29 to 204 ºC |
Cv |
N/A 0.22 |
Voltage |
N/A 115 VAC |
Coil Insulation Rating |
N/A Class H (180° C) |
Coil Type |
N/A Single Wound Molded |
Dim. X |
N/A 5 3/4 in |
Dim. Y |
N/A 4 5/8 in |
Dim. Z |
N/A 2 3/4 in |
Type |
N/A Solenoid Valve |
.jpg)
